FlexRadio Accessories

Online Catalogue | Transceivers | HF & Multiband | HF & Multiband Accessories | FlexRadio Accessories

Best Sellers

A9 3m x 38mm (10ft x 1.5in) Straight Aluminium Pole

Only £21.95

RH-770 Diamond 2m/70cm Telescopic

Only £35.95

W-770HB Watson 2m/70cm Dualbander with Fold-over base

Only £19.95

WSMA-881 Watson 25-1900MHz Super Gainer SMA

Only £19.95

W-ECH Watson Mobile Aerial Cable Kit

Only £12.95

RadarBox-Pro - The world's best selling and most advanced Real Time Virtual Radar. Can be upgraded to 3D version.

Only £299.95

New Products

RAFFLE-2012 W&S Open Day 2012 Raffle Ticket

Only £1.00

IC-F5022 PMR VHF 128 CH & screen 136-174MHz microphone mobile mount & DC lead

Only £254.95

TS-990S 1.8-50MHz 200W Transceiver

Only

*SPECIAL OFFER* KAM-XL Kantronics All Mode TNC

Only £169.95

ACC-1500-PWR Spare power cable for FLEX-1500

Price: £14.95 (Including VAT) Good Stock Level
Quantity:

ACC-1500-PWR Spare power cable for FLEX-1500

ACC-F3KF5K-PWR Spare power cable for FLEX-3000/5000

Price: £27.95 (Including VAT) Good Stock Level
Quantity:

ACC-F3KF5K-PWR Spare power cable for FLEX-3000/5000

RX-2 Second receiver option for FLEX-5000A

Price: £679.95 (Including VAT) Good Stock Level
Quantity:

5000-ATU 160-6m Automatic ATU for FLEX-5000A

Price: £329.95 (Including VAT) Low Stock - Phone
Quantity:

160-6m Automatic ATU for FLEX-5000A

FLEX-CONTROL Interface for FLEX-5000/3000/1500 a knob on a console with programmable function buttons

Price: £119.95 (Including VAT) Good Stock Level
Quantity:

FLEX-CONTROL Interface for FLEX-5000/3000/1500 a knob on a console with programmable function buttons

HRFIO Upgrade HRFIOI version 34 board for FLEX-5000A (RX-2 and early FLEX-5000)

Price: £179.95 (Including VAT) Low Stock - Phone
Quantity:

HRFIO Upgrade HRFIOI version 34 board for FLEX-5000A (RX-2 and early FLEX-5000)

DELTA-44 M-Audio Delta 44 Professional 4-in/4-out audio card 24bit sampling

Price: £149.95 (Including VAT) Good Stock Level
Quantity:

* 4x4 24bit/96kHz Full Duplex recording interface * PCI host card with external breakout box * 4x4 analogue I/O accepts balanced or unbalanced connections on 1/4in jacks * Analogue I/O configurable for +4dBu * Analogue dynamic range exceeding 103dB * All data paths support up to 24bit/96kHz performance - no upgrades necessary * Comprehensive digital mixing, routing and monitoring capabilities * Windows 95/98 & XP multi-card drivers with ASIO1 & ASIO2 multi-card, GSIF & EASI drivers included
One of the preferred optional extras for the SDR-1000 is the M-Audio Delta 44 high grade professional sound card. This fits into a free PCI slot and is accessed by a breakout box on the end of a fifteen way connector. The breakout box is fitted with 1/4in jack sockets at the front for the input and output connections. To connect the breakout box to the SDR-1000 an optional set of 4 cables (PC-DELTA) are required (1/8in stereo to dual 1/4in balanced).

PC-DELTA Set of 3 PC Connecting Leads for Delta 44 Break Out Box

Price: £2.95 (Including VAT) Low Stock - Phone
Quantity:

Set of 3 PC audio connecting leads for Delta 44 breakout box (1/8in stereo to dual 1/4in balanced).
Please note that the 1/4in audio leads from the Delta-44 Sound Card to the SDR-1000 should be placed the right way round. This depends on the batch of leads supplied. A fault condition will manifest itself by the wrong sideband reception on receive i.e. USB instead of LSB and vice versa, and although the PTT will work, there will not be any microphone audio.

PC-DELTA-KIT Set of 3 connecting leads for SDR-1000 to Delta-44-Kit

Price: £1.95 (Including VAT) Low Stock - Phone
Quantity:

Set of 3 connecting leads for SDR-1000 to Delta-44-Kit
3.5mm stereo plugs each end

PC-AUDIO Lead Kit to Connect 3.5mm PC Speaker's plug to Delta-44 Breakout Box

Price: £2.95 (Including VAT) Good Stock Level
Quantity:

Lead kit to connect 3.5mm PC speaker's plug to Delta-44 breakout box

SDR-CLK External Reference Clock Kit - 10 or 20MHz

Price: £10.95 (Including VAT) Good Stock Level
Quantity:

The SDR-CLK is an external Clock Reference Kit to operate the DDs oscilator from an external 10 or 20MHz precision frequency reference. The internal 200MHz oscillator must be removed to use the external reference clock.

SDR-100WPA 100W Amplifier for SDR-1000-1

Price: £462.95 (Including VAT) Good Stock Level
Quantity:

* Bands 160, 80, 60, 40, 30, 20, 17, 15, 12, 10m * Power output 100W PEP, 50W on 60m * Elliptical filters on all bands * Drive requirements <500mW for full output * Output devices: Rugged matched pair 2SC2879s * Duty cycle: Intermittent SSB service (25W continuous duty) * Hamonic content <-43dBc * Load tolerance 2:1 SWR or better * Software monitoring: Forward/Reverse Power & SWR * SWR protection: automatic power reduction for SWR>2:1 * DC Power 13.8V DC at 25A for full output * Output socket BNC 50 Ohm (rear panel) * Cooling fan 80x80x15mm (rear panel
The SDR-100wpa is a 100W HF linear power amplifier, designed exclusively for use in the SDR-100. It is already included in the SDR-1000-100 model, but is an optional item for the SDR-1000-1. The amplifier is fully assembled and can be easily fitted into the DSR-1000 case. To use the PA the SDR-RFE board must be fitted, which it is in the DSR-1000-1.

VFO-KNOB Griffin PowerMate VFO Control Knob USB silver in colour

Price: £52.95 (Including VAT) Good Stock Level
Quantity:

The Griffin PowerMate VFO Control Knob gives extra functionality to the SDR-1000 for ease of use. It connects to a USB port on the computer and provides variable-rate VFO tuning. A simple click of the knob changes the tuning rate to any one of four use defined tuning rates. Made of high quality aluminium, PowerMate's heavy weight and tactile use makes it feel like an attached tuning knob. Can be used with other programs.

SDR-ATU Automatic Antenna Tuning Unit upgrade 160-6m

Price: £219.95 (Including VAT) Good Stock Level
Quantity:

* Continuous coverage 1.8 to 54MHz * Power range 0.1 to 125E, 50W on 6m * Microprocessor controlled, switched L tuing network * Automatically matches antenna from 6-800 Ohms * Tunes from memory < 1 second * Full tune 1 -6 seconds * 200 Memories
The SDR-ATU is a fully integrated antenna tuning unit that works across the whole of the HF range. It will tune dipoles, vertical, Yagis or virtually any coax-fed antenna. It will match a wide range of antenna and impedances.
Easy to retrofit if not originally fitted in SDR-1000 case.

VFO-SHUTTLE ShuttlePro V.2 (USB) the ultimate input device for rig control

Price: £92.95 (Including VAT) Good Stock Level
Quantity:

The ShuttlePro V.2 is the ultimate input USB device for rig control. It has a main tuning knob, a programmable Shuttlejog control, and nine programmable buttons. It you want more than mouse control, the Shuttle-Pro can be configured to control the tuning of the SDR-1000. As you get use to the control so you can program it up. It can be used for many other purposes as well.