NorTree requires JavaScript
Product Menu
Online Shop > HF Antennas > Vertical Antennas > HIGH SIERRA HF Vertical Antennas
The Eldorado Package includes an HS-1800 type antenna, stainless steel whip 1.8m, 8 wire radials, manual control box and cables. The antenna is virtually the same as the HS-1800. However, it is a package system that is designed for home or base use rather than mobile. The system can be installed on a roof, balcony, exterior wall, tripod, TV mast or just about anywhere. In the picture, the metal parts of the table are being used as a counter-poise.
The PONDEROSA is a compact, motorised HF Antenna. Based on the HS-SIDEKICK it is built to the same high standard and uses similar components. The lower high current section is a little under 2in (51mm) diameter and houses the coil assembly. No Beryllium finger stocks are used, as is the case for all High Sierra Antennas. The Blackhawk motor arrangement is a custom-built motor very much more efficient than competitors screwdriver motors, and almost silent in use.
Tuning the antenna is done by raising or lowering the top section with its 0.9m whip via the switch on the control box, and getting a minimum SWR. These readings can be obtained from the metering on most modern HF rigs, or via an external SWR/Power meter.
c/w 50ft coax, control box and includes two extra conductors, cennectors, connector seal, and 4x 3m radials for counterpose.
Visit our eBay shop for more bargains!eBay Click here to enter our Ebay shop