MFJ-1106 6-way DC Outlet

The MFJ-1106 is an inexpensive compact and low profile DC distribution platform designed for your operating station desk/workbench. It contains seven Anderson Power Pole connectors which can be connected in parallel, permitting one DC input to be shared by six other DC outputs. It includes seven sets of mating connectors for your cables. Any connector may be used as an input or output, and the total current carrying capacity is 30A. Unit measures 56 x 25.4 x 95.2mm

Price: £32.95 / €41.19 (Including VAT)

In Stock

MFJ-1112 6-way DC Power Outlet

This 13.8V DC distribution board will handle a total of 15A. DC input cable has spade terminals and 6 DC outlets are provided. Each output is rated at 5A max. There are no fuses, On/Off switch, LED or meter on this item. Do not connect your HF radio to the MFJ-1112 as it is designed for accessories only. Fuse protection relies on your equipment or power supply fuses. It cannot be used for AC mains. Size 34 x 6.5 x 3cm approx.

Price: £48.95 / €61.19 (Including VAT)

In Stock

MFJ-1116 8-way DC Power Outlet

This 13.8V DC distribution board will handle a total of 15 Amps. The DC input cable is fitted with spade terminals. There are 8 x 5A outputs, 0 - 25V meter, On/Off switch and external 15A fuse. Do not connect your HF radio to the MFJ-1116 as it is designed for accessories only. It cannot be used for AC mains. Size 34 x 6.5 x 3cm approx.

Price: £63.95 / €79.94 (Including VAT)

In Stock

MFJ-1117 2-way 35A and 2-way 17.5A Outlets

This 13.8V DC distribution board will handle a total of 35A. DC input cable has spade terminals and 4 DC outlets are provided. 2 outputs are rated at 35A max. and 2 at 17.5A max. Posts A and B are individually fused and Posts C and D are commonly fused with one 35A fuse. This alleviates the problems of multiple radio connections to the same DC power supply. Note: While you may connect up to 4 radios to the MFJ-1117, you may not draw more than 35A. It cannot be used for AC mains. Size 22 x 6.5 x 3cm approx.

Price: £63.95 / €79.94 (Including VAT)

In Stock

MFJ-1118 Deluxe Multiple DC Power Outlet

This deluxe 13.8V DC distribution board will handle a total of 35 Amps. DC input cable has spade terminals. Outputs are 2 x 35A, each pair is unswitched, individually fused and RF bypassed, handles 35A total. Also has six pairs of 5A outputs, common switched, RF bypassed, combined maximum total 15A and protected by a master fuse. There is a 0 - 25V meter, On/Off switch, LED and internal fuse protection. The MFJ-1118 is ideal for connecting up two radios, plus up to six station accessories. Size 34 x 6.5 x 3cm approx.
fusesinternal 15 Amp fuse. It cannot be used for AC mains. Size 35 x 6.5 x 5.5cm approx.

Price: £87.95 / €109.94 (Including VAT)

In Stock

MFJ-1124 6-way 12V DC Outlet

6-way 12V DC Outlet. 4 x Anderson PowerPole 2x binding posts.

Price: £68.95 / €86.19 (Including VAT)

In Stock

MFJ-1126 8-way 12V DC Outlet

8-way 12V DC Outlet. 6 x Anderson PowerPole 2x binding posts.

Price: £82.95 / €103.69 (Including VAT)

In Stock

MFJ-1128 12-way 12V DC Outlet

12-way 12V DC Outlet. All Anderson PowerPole, Voltmeter on/off switch

Price: £105.95 / €132.44 (Including VAT)

In Stock

MFJ-1129 10-way 12V DC Outlet

10-way 12V DC Outlet. 7 x Anderson PowerPole 3x binding posts, Volt meter, on/off switch.

Price: £115.95 / €144.94 (Including VAT)

In Stock

MFJ-4403 Transceiver Voltage Conditioner

* Reverse polarity protection * Transient suppression * Short circuit protection * Noise and ripple filtering * Three coloured LEDs, Reverse Red, Charging Yellow and Power Green
The MFJ-4403 Transceiver Voltage Conditioner is designed to protect transceivers and other equipment from possible damage due to unexpected changes to the battery supply to the equipment in question. This makes the MFJ-4403 particularly valuable for mobile or portable use and will handle the power requirements for SSB rigs up to 100W, it can even be useful in the home.

Price: £115.95 / €144.94 (Including VAT)

In Stock

MFJ-4416 12V Super Battery Booster

Keeps your transceiver operating at full efficiency and performance by eliminating low or marginal voltages in the mobile environment Today's compact 100W HF transceivers are designed to operate from about 12-16V, with output signal distortion, output power problems, and transceiver reset often occurring when voltage drops below 12V. In the mobile environment, low voltage is caused in two ways: First - even low resistance DC wiring can result in a noticeable voltage drop. For a 100W transceiver with a 20A typical current requirement, just 1/10th of an ohm resistance in your DC cable and connectors results in a 2V drop! And second - when you turn your car off, the battery voltage drops from around 13.8V to close to 12V after a short period of time. Couple this with any voltage drop in the cables, and you have a problem. The MFJ-4416 Super Battery Booster eliminates low voltage problems by boosting input voltages as low as 9V up to the desired 13.8V at up to 25A peak with a typical efficiency of close to 90%. And the MFJ- 4416 Super Battery Booster is designed to be rugged, reliable, and easy to use. MFJ-4416 includes Anderson PowerPole connectors and high-current 5-way binding posts for both the DC input and regulated output. An internal 30-amp input fuse protects the unit from excess output current demands. There are also selectable limits on the minimum voltage that the unit will accept: 9V, 10V (default), and 11V. This protects you from over-discharging a battery and possibly damaging it. MFJ-4416 also includes output over-voltage crow-bar protection should regulation be lost. Two additional features offer ways to increase efficiency even more! First, there is an RF sampling port which can be connected to your transceiver's transmission line with a UHF-T connector. When this feature is enabled, the MFJ- 4416 is bypassed unless RF is sensed so no regulator switching efficiency penalties are incurred during receive. The second efficiency enhancement feature is a user-adjustable output voltage control which lets you set the output voltage anywhere between 12 and 13.8V. When setting the output at 12V, input voltages greater than 12V will pass through, but the efficiency of the regulator is higher. And lower input voltage means your transceiver will run cooler! Typically save over 30W in heat dissipation during transmit, and even 3-4W during receive. So it can actually be good to let the voltage sag to 12V, then let the MFJ-4116 protect you from lower voltages. Anderson PowerPole Cables MFJ-5535M.. HF radio power cable to Anderson PowerPole. Fits Yaesu, Icom, Kenwood and compatibles. 2 superflex, 12-gauge, multi-stranded, 8ft. cables with two in-line fuse holders and fuses. MFJ-5512M. VHF/UHF radio power cable to Anderson PowerPole. Fits Yaesu, Icom, Kenwood and compatibles. Two super-flex, 14-gauge, multistranded, 15ft long cables with single in-line fuse holder and fuse.

Price: £135.95 / €169.94 (Including VAT)

Out Of Stock

MFJ-5510 12VDC Cigarette Lighter Cable for MFJ Accessories

12VDC Cigarette Lighter Cable for MFJ Accessories

Price: £10.95 / €13.69 (Including VAT)

In Stock

MFJ-5512 DC cable for VHF / UHF Mobile transceiver

DC cable for VHF / UHF Mobile transceiver

Price: £11.95 / €14.94 (Including VAT)

In Stock

MFJ-5512M DC cable for VHF / UHF Mobile transceiver Anderson Power Poles

DC cable for VHF / UHF Mobile transceiver Anderson Power Poles

Price: £19.95 / €24.94 (Including VAT)

Out Of Stock

MFJ-5535M DC cable for HF transceiver fitted Anderson Power Poles

DC cable for HF transceiver fitted Anderson Power Poles

Price: £23.95 / €29.94 (Including VAT)

In Stock

MFJ-7602 Gardner Bender Forged Crimp Tool

Gardner Bender forged crimp tool to install powerpoles without soldering.

Price: £16.95 / €21.19 (Including VAT)

In Stock