NorTree requires JavaScript
Product Menu
Online Shop > HF Antennas > Vertical Antennas > MFJ HF Vertical Antennas
The MFJ-1621 is a "go anywhere" antenna. It comprises of 1.37m telescopic whip, built-in ATU, field strength meter and 15.24m coax feeder. It covers 40-10m and handles 200W. Connect feeder to transceiver adjust tuner and you are on the air! Ideal for portable operation.
The MFJ-1792 high performance vertical antenna for 80 and 40m. End loading the most efficient form of loading is used for 80m. It uses a 1.37m top capacitance hat and a high-Q coil and features a full size quarter wave radiator for 40m.
The MFJ-1793 high performance vertical antenna for 80, 40 & 20m. End loading, the most efficient form of loading is used for 80m. It uses a 1.37m top capacitance hat and a high-Q coil which is the same as the MFJ-1792 but also features a full size quarter wave radiator for 20m.
The MFJ-1795 is designed to provide portable or permanent operation from restricted locations. This reduction in size is accomplished by adding separate loading coils and capacitance hats for each band at the top of the antenna. The antenna can be installed using the supplied mounting bracket and a suitable ground radial system. Full instructions and parts list are provided for assembling this antenna and for cutting the capacitance hat elements.
The MFJ-1795W is designed to provide portable or permanent operation from restricted locations. This reduction in size is accomplished by adding separate loading coils and capacitance hats for each band at the top of the antenna. The antenna can be installed using the supplied mounting bracket and a suitable ground radial system. Full instructions and parts list are provided for assembling this antenna and for cutting the capacitance hat elements.
The MFJ-1796 vertical antenna that will fit into a small space. Vertical antennas are known for their low angle radiation for DX working, even when erected at a low height. There are no radials and subject to safety restrictions, it can be erected as low as 1.5m above the ground. Ceramic coils and end loading ensure that losses are kept to a minimum and each band can be individually resonated.
The MFJ-1798 could be the answer to many hams problems, a vertical antenna that does not take up much space, requires no radials and covers ten bands from 80m to 2m. With a total height of 6.7m, this antenna exhibits very low angle radiation and so is ideal for DX operation. All you need is a single coaxial feed line to give you ten band operation with automatic switching.
The antenna is installed using the supplied MFJ-1904 Ground Coupled Mounting Plate. Full instructions and parts list are provided for assembling this antenna and for cutting the capacitance hat elements.
The MFJ-1795 is designed to provide portable or permanent operation from restricted locations. This reduction in size is accomplished by adding separate loading coils and capacitance hats for each band at the top of the antenna. The antenna is installed using the supplied MFJ-1904 Ground Coupled Mounting Plate and a suitable ground radial system. Full instructions and parts list are provided for assembling this antenna and for cutting the capacitance hat elements.
Visit our eBay shop for more bargains!eBay Click here to enter our Ebay shop
