NorTree requires JavaScript
Product Menu
Online Shop > HF Antennas > Wire Antennas > MFJ Wire HF Antennas
c/w 30m ladder line, glazed ceramic end insulators, ladder line stress relieving fibreglass centre insulator, 7-strand, #14 gauge hard copper wire
Requires balanced line tuner or tuner/balun
c/w 30m ladder line, glazed ceramic end insulators, ladder line stress relieving fibreglass insulator
Ideal folded dipole antenna for portable station use.
Each HF band uses a separate, efficient end-loading coil wound on fiberglass forms with TeflonTM wire, and capacitance hats at each end (no lossy traps). 6 and 2m are full-length halfwave dipoles.
Not much bigger than a TV antenna it can easily be turned by a lightweight TV rotator
Each WARC band uses a separate, efficient end-loading coil wound on fiberglass forms with TeflonTM wire, and capacitance hats at each end (no lossy traps). 6 and 2m are full-length halfwave dipoles.
Solderless, crimped construction, 7-strand #14 gauge hard copper wire. Ultra-efficient end-loading on 40m
Coax not included. No tuner required.
Solderless, crimped construction, 7-strand #14 gauge hard copper wire. Ultra-efficient end-loading on 80m
Supplied assembled with fibreglass feed point insulator, glazed ceramic insulator, heavy duty 7-strand 14 gauge hard copper wire, crimped construction - coaxial cable not supplied.
The MFJ end-fed Zepp is a completely assembled single-band half-wave antenna. It is designed for direct coax feed and handles the full legal limit with low SWR.
The MFJ-6215 single band two halfwave element collinear array gives you nearly 2dB gain - about 150% power gain and twice the receiving capture area of a halfwave dipole. Handles 1500W.
Supplied assembled with fibreglass feed point centre insulator, glazed ceramic insulators, heavy duty 7-strand 14 gauge hard copper wire, crimped construction - coaxial cable not supplied.
The MFJ-6217 single band two halfwave element collinear array gives you nearly 2dB gain - about 150% power gain and twice the receiving capture area of a halfwave dipole. Handles 1500W.
The MFJ-6220 single band two halfwave element collinear array gives you nearly 2dB gain - about 150% power gain and twice the receiving capture area of a halfwave dipole. Handles 1500W.
The MFJ-6230 single band two halfwave element collinear array gives you nearly 2dB gain - about 150% power gain and twice the receiving capture area of a halfwave dipole. Handles 1500W.
The MFJ-6240 single band two halfwave element collinear array gives you nearly 2dB gain - about 150% power gain and twice the receiving capture area of a halfwave dipole. Handles 1500W.
The MFJ-6415 four halfwave element collinear array gives you a huge 4.5dB gain - about 300% power gain. You get four times the receiving capture area of a halfwave dipole. Handles 1500W.
Supplied assembled with glazed ceramic insulators, heavy duty 7-strand 14 gauge hard copper wire, crimped construction - includes 30.48m (100ft) of 450 Ohm ladder line for connection to your tuner
The MFJ-6417 four halfwave element collinear array gives you a huge 4.5dB gain - about 300% power gain. You get four times the receiving capture area of a halfwave dipole. Handles 1500W.
The MFJ-6420 four halfwave element collinear array gives you a huge 4.5dB gain - about 300% power gain. You get four times the receiving capture area of a halfwave dipole. Handles 1500W.
Visit our eBay shop for more bargains!eBay Click here to enter our Ebay shop
