NorTree requires JavaScript
Product Menu
Online Shop > RF Measuring & In-line Devices > Nearfield Test Receivers
This X-Sweeper is a revolutionary nearfield receiver with a graphical display that shows the nearfield (analogue only) in a spectrum format, allowing the user to rapidly observe all signals that are present, not just one single frequency at a time. Fitted with a GPS receiver module (factory fitted) this enables X-Sweeper to display Lat and Long at the time of detection of signals.
The X-Sweeper is a revolutionary nearfield receiver with a graphical display that shows the nearfield (analogue only) in a spectrum format, allowing the user to rapidly observe all signals that are present, not just one single frequency at a time. There is an optional GPS receiver module that is factory fitted inside the X-Sweeper, and this enables the Lat and Long of the X-Sweeper to be displayed at the timeof detection of signals.
Now with Reaction Tune, this device will lock onto an active frequency within its range in less than a second. Not only will it lock onto the frequency, it has the capability of storing the channel in one of its 500 memories and also demodulating any FM signal and passing it to the built-in speaker. It also has the capability of displaying virtually any subaudible tone, including CTCSS, DTMF, DCS, LTR Trunking etc.
The Micro RF Detector is designed for operation in the nearfield of a transmitter operated from 10MHz to 2GHz. It displays the relative signal strength on its numeric display * There are two swicheable displays of signal strength, and an audible alarm which can be set to activate when the signal strength reaches a pretermined level. The 2.5mm socket on the side is for the optional TMC100 antenna.
* Sensitivity control * Internal Ni-Cds * AC charger * 68 x 80 x 31mm * 230g
There are many applications that this unitl can fulfill such as microwave leakages, hidden transmitters, dangerous areas, antenna radiation field checks.
The unit is totally portable and comes with internal rechargeable battery pack and AC charger. The speaker can be switched off so that only the vibrator operates for covert use.
The WR-5001 UHF/VHF nearfield receiver has the ability to lock automatically and almost instantly on to any FM signal within its frequency range. FM signals are demodulated and output through its internal speaker or to the provided external earphone. The SKIP button enables the WR-5001 to resume its search after locking onto an unwanted signal. Its high sensitivity to nearfield signals makes it ideal for RF security, counter surveillance and radio communication testing applications. The WR5001 is supplied with internal Ni-Cad pack, AC wall charger, VHF/UHF flexible antenna and audio earphone.
The WR-5002 UHF/VHF nearfield receiver has the ability to lock automatically and almost instantly on to any FM signal within its frequency range. FM signals are demodulated and output through its internal speaker or to the external earphone provided. The WR-5002 has Auto Hold (switchable on/off) which locks the Rx on to a demodulated signal. The SKIP button is useful for enabling the scan after stopping on an unwanted signal. It also has a CI-V port for Reaction Tuning with a suitable frequency counter such as the Watson Super Searcher. Its high sensitivity to nearfield signals makes it ideal for RF security, counter surveillance and radio communication testing applications. The WR5002 is supplied with internal Ni-Cad pack, AC wall charger, VHF/UHF flexible antenna and audio earphone.
Visit our eBay shop for more bargains!eBay Click here to enter our Ebay shop
