SSB Electronics

* Freq. 50 - 52MHz * Gain 10-20dB * Noise 0.9dB * 750W by-pass * Insertion loss 0.1dB * RF-VOX 200W * Connectors N-type * Supply 13.8V DC * 115 x 30 x 90mm * Weight 220g

SSB-SP-2000 SSB ELECTRONICS 2m Masthead Pre-amp

Price: £259.95 (Including VAT) Good Stock Level
Quantity:

* Freq. 144-146MHz * Gain 10-20dB * Noise 0.8dB * 750W by-pass * Insertion loss 0.2dB * RF-VOX 100W * Connectors N-type * Supply 13.8V DC * 115 x 30 x 90mm * Weight 220g

SSB-SP-7000 SSB ELECTRONICS 70cm Masthead Pre-amp

Price: £259.95 (Including VAT) Good Stock Level
Quantity:

* Freq. 430-440MHz * Gain 10-20dB * Noise 0.9dB * 500W by-pass * Insertion loss 0.4dB * RF-VOX 100W * Connectors N- type * Supply 13.8V DC * 115 x 30 x 90mm * Weight 220g

SSB-SP-23 SSB ELECTRONICS 23cm Masthead Pre-amp

Price: £379.95 (Including VAT) Low Stock - Phone
Quantity:

* Freq. 1250-1296MHz * Gain 20dB * Noise 0.8dB * 100W by-pass * Insertion loss 0.2dB * RF VOX 10W * Connectors N-type * Supply 13.8V DC * 134 x 72 x 103mm * Weight 730g

SSB-SP-13B SSB ELECTRONICS 13cm Masthead Pre-amp

Price: £339.95 (Including VAT) Good Stock Level
Quantity:

* Freq. 2300-2400MHz * Gain 24dB * Noise 0.9dB * Insertion loss 0.4dB * RF VOX 10W * 50W/SSB with DCW-15/2004 SHF * Waterproof housing * Connectors N-type * Stainless steel fittings * Supply 13.8V DC * 135 x 75 x 120mm * Weight 480g

DCW-2004B SSB ELECTRONICS Sequencer for 6m, 2m, & 70cm

Price: £119.95 (Including VAT) Good Stock Level
Quantity:

* 6m, 2m, 70cm * Connectors N-type * Supply 12 - 15VDC * 140 x 54 x 120mm * Weight 600g
Remote controller for SSB-SP6, SSB-SP-2000/7000. This unit allows you to pass 13.8V DC up the coax feed line to the preamplifier. This avoids the need to run a separate DC feed line up to the preamplifier. If the DC fails, the unit defaults to bypass mode.

DCW-2004B-SHF SSB ELECTRONICS Sequencer for 13/23cm

Price: £129.95 (Including VAT) Good Stock Level
Quantity:

* 13cm, 23cm * Connectors N-type * Supply 12 - 16VDC * 140x 54 x 120mm * Weight 600g
Remote controller for SSB-SP13, SSB-SP-23. This unit allows you to pass 13.8V DC up the coax feed line to the preamplifier. This avoids the need to run a separate DC feed line up to the preamplifier. If the DC fails, the unit defaults to bypass mode.