NorTree requires JavaScript
Product Menu
Online Shop > RF Measuring & In-line Devices > VSWR Power Meters
* Size 85 x 87 x 95mm * Weight 280g
This new model is ideal for the HF and VHF operator. It features high power handling up to 1000W. Accuracy is 5% on 5W, 7.5% on 20W, 10% on 200W and 12.5% on 400W. The large clear meter means easy readout.
This model is ideal for the VHF and UHF operator. It features high power handling up to 400W. Accuracy is 5% on 5W, 7.5% on 20W, 10% on 200W and 12.5% on 400W. The large clear meter means easy readout.
Treat yourself to the new Avair AV-601 VSWR / Power Meter. It reads RMS and PEP and covers from 1.8MHz to 525MHz. It uses two sensors with four power ranges 0-5W / 20W / 200W 400W / 1000W.
New model from AVAir - The AV-1000 for HF, VHF, UHF & 23cm. It has identical styling with other models in the range including a large clear meter for easy readout. Built-in lamp for illumination, just requires an external 12V supply. Average or PEP at a switch of a button.
This new model covers 1.6 to 60MHz and is ideal for HF +6m operation. It features high power handling up to 3000W and has a large clear meter for easy readout.
This new model covers 1.8 to 200MHz and is ideal for HF & VHF operation. It features power handling up to 200W and has a large clear meter for easy readout.
This new model covers 125 to 525MHz and is ideal for VHF/UHF operation. It features power handling up to 200W and has a large clear meter for easy readout.
This new model covers 1.8 to 525MHz and is ideal for HF/VHF/UHF operation. It features power handling up to 200W and has a large clear meter for easy readout.
Meter is 5x3.25x1.675 inches. The sensor is 3.5x2.75x2.75 inches (not shown). Requires a 9 volt battery or 12 VDC
The MFJ-815C offers the convenience of a dual needle meter that permits monitoring forward and reflected power at the same time and a choice of either Peak or Average Power.
The MFJ-818 is particularly useful for mobile/portable use as it has been specially ruggedised for this purpose.
The meter is fully enclosed in a strong aluminium case with just the buttons and sockets exposed.
The cross-needle SWR/PWR meter measures forward and reflected power and SWR simultaneously, and is designed to operate on 1.8 to 30MHz. It has two power ranges, the high power scale measures 0 to 300W forward power and 0 to 60W reflected power. The low power scale measures 0 to 30W forward power and 0 to 6W reflected power.
Lets you check the power output from your handheld and also check the antenna VSWR.
Accurately measures true RF currents in antenna elements, radials, ground wires, and on outside of coax feedlines. The sense coil simply snaps over wires and cables for fast measurements on easy-to-read meter. Six selectable ranges, five ranges to measure actual RF current from 30mA to 30A FSD, and a sixth range with a variable sensitivity control. Great for tracking down RFI causing currents on household wiring.
The MFJ-867 is similar to MFJ-868 giant wattmeter but covers 144/220/440MHz frequencies. It is the
World's largest VHF/UHF SWR/Wattmeter and measures a giant 165mm diagonally across meter scale!
This huge scale gives you ultra-fine resolution and its big high-contrast numbers makes for easy reading
The MFJ-868 is the World’s largest SWR/Wattmeter, the dial measures 16.5cm (61/2in) diagonally across.The full width SWR scale gives ultra-fine resolution and makes reading SWR much more accurate and easier to read. Covers 1.8 to 30MHz with switchable 20/200/2000W power ranges.
Uses MFJ's exclusive TrueActiveTM peak reading circuit which captures true peak or average forward and reflected power readings.
The MFJ Wattmeter PowerSaverTM circuit turns on meter only when RF power is being measured. Covers 1.8 to 30MHz. Uses 9V PP3 battery (not supplied).
790g * Connector SO-239
Read SWR directly and forward, Reverse, Peak/Average power. Remote coupler.
